Would you look at that? You have finally decided to take the plunge into painting your car and looks like you want to do it yourself. The very first thing that I wanted to tell you was that it is NOT going to be easy if you want to do it yourself. Because, unfortunately, you can’t just grab some cans of paint and start laying down some color on your car, it does not work like that at all. Painting a car would undoubtedly require so much more planning and effort as well. You will also need to have a lot of practice and patience too. In this guide, I will list out some basic knowledge about this procedure that you should know. These tips can certainly get you started peacefully.
– There is some deconstruction work that you should have in mind. The very first step to a proper re-spray would be removing all of the little bits of the trim, emblems and also non-painted parts temporarily. Some things you can actually put tape on or around. Taping around bumpers and door handles is really dumb, which is why you should not do it. Take some time to actually remove these items before you start spraying. You final product will definitely look way better because of all of your effort.
– Paint shows everything, and this would be even to the finest detail. If you car has chips, flaws and some scratches you cannot exactly paint over it and then expect it to just disappear. They will actually show up worse if you just paint over them. You need to strip it and then put some new paint over it. You will find some scratch removers which you can use as well.
– Sanding is an important step. If you are going to paint the car, you will also have to be doing a lot of sanding, and you should just accept that. If the existing paint is in decent shape, it can actually be prepared with some fine scotch-Brite pad. You should not sand the body any high than 500-grit because the paint needs some roughness so that it can lock onto it.
– One of the most common reasons for a new paint job would be the damage and also the rusting of the metal. There are some chances that this rust might have caused some damages to the metal. If you are sensing that you have no clue how bad it is, you should make sure that you just contact some experts about this issue. Since they do this for a living, they will know what to do.